User Manual

processing.
Bypass Frequency Band
To bypass a frequency band, activate the [Band] button ( ) in each section.
Solo Frequency Band
To solo a frequency band, activate the [S] button on each section. Only one frequency
band can be soloed at a time.
OUTPUT (-24 to 24 dB)
Sets the output level.
[COMPRESSOR] Section
You can specify the [Threshold] and [Ratio] by moving breakpoints or using the corresponding knobs.
The threshold is marked by the first breakpoint where the line deviates from the straight diagonal.
THRESH (-60 to 0 dB)
Determines the level where the compressor kicks in. Only signal levels above the set threshold
are processed.
RATIO
Sets the amount of gain reduction applied to signals above the set threshold. A ratio of 3:1
means that for every 3 dB the input level increases, the output level increases by 1 dB.
ATTACK (0.1 to 100 ms)
Determines how fast the compressor responds to signals above the set threshold. If the attack
time is long, more of the early part of the signal passes through unprocessed.
RELEASE (10 to 1000 ms or [AUTO] mode)
Sets the time after which the gain returns to the original level when the signal drops below the
threshold. If [Auto Release] is activated, the plug-in automatically finds the best release
setting for the audio material.
SC (Side-chain Section)
To open the side-chain section, click the [SC] button at the bottom left of the plug-in window.
Important
To be able to use the side-chain function for the bands, global side-chain must be activated for the
plug-in.
SIDE-CH
Activates the internal side-chain filter. The side-chain signal can then be shaped according to
the filter parameters.
Dynamics Plug-ins
VST Rack Pro Plug-in Reference | 25