User Manual

OUTPUT (-24 to 24 dB)
Sets the output level.
Shaper Section
You can specify the [Attack], [Length], and [Release] by moving breakpoints or using the
corresponding knobs. Be careful with levels when boosting the gain. You can reduce the output level to
avoid clipping.
ATTACK (-20 to 20 dB)
Sets the gain of the attack phase of the signal.
LENGTH (5 to 200 ms)
Sets the length of the attack phase.
RELEASE
Sets the gain of the release phase of the signal.
SENSITIVITY (-40 to -10 dB)
Sets the sensitivity of the detection.
OUTPUT
Sets the output level.
Dynamics Plug-ins
28 | VST Rack Pro Plug-in Reference