User Manual

Reverb Plug-ins
REVelation
REVelation produces a high-quality algorithmic reverb with early reflections and reverb tail.
The early reflections are responsible for the spatial impression in the first milliseconds of the reverb.
For emulating different rooms, you can choose between different early reflections patterns and adjust
their size. The reverb tail, or late reverberation, offers parameters for controlling the room size and
the reverb time. You can adjust the reverb time individually in 3 frequency bands.
PRE DELAY
Determines how much time passes before the reverb is applied. This allows you to simulate
larger rooms by increasing the time it takes for the first reflections to reach the listener.
EARLY REFLECTION
Here, you select an early reflections pattern. The early reflections pattern contains the most
important delays that deliver the key information for the spatial impression of the room.
ER/TAIL
Sets the level balance between the early reflections and the reverb tail. At a setting of 50 %,
early reflections and tail have the same volume. Settings below 50 % raise the early reflections
and lower the tail, as a result the sound source moves towards the front of the room. Settings
above 50 % raise the tail and lower the early reflections, as a result the sound source moves
towards the back of the room.
SIZE
Adjusts the length of the early reflections pattern. At a setting of 100 %, the pattern is applied
with its original length and the room sounds the most natural. At settings below 100 %, the
early reflections pattern is compressed and the room is perceived smaller.
LOW CUT
Attenuates the low frequencies of the early reflections. The higher this value, the less low
frequencies are present in the early reflections.
Reverb Plug-ins
42 | VST Rack Pro Plug-in Reference