User Manual

REVerence
REVerence is a convolution tool that allows you to apply room characteristics (reverb) to the audio.
This is done by processing the audio signal according to an impulse response – a recording of an impulse
in a room or another location that recreates the characteristics of the room. As a result, the
processed audio sounds as if it were played in the same location. Included with the plug-in are top
quality samples of real spaces to create reverberation.

REVerence can be very demanding in terms of RAM. This is because the impulse
responses that you load into the program slots are preloaded into RAM to guarantee
artifact-free switching between programs. Therefore, you should always load only
those programs that you need for a given task.
Program Matrix
A program is the combination of an impulse response and its settings. These include reverb settings,
EQ settings, pictures, and output settings. The program matrix allows you to load programs or to view
the name of the impulse response.
Program Name
In the upper left corner of the plug-in panel, either the name of the loaded impulse response file
or the name of the program is shown. After loading an impulse response, its number of channels
and the length in seconds are displayed for a few seconds.
BROWSE
This button opens a browser window showing the available programs. If you select a program in
the browser, it is loaded into the active program slot. To filter the list of impulse responses by
room type or the number of channels, for example, activate the [Filter] section (by clicking the
[Set Up Window Layout] button at the top right of the browser window).
IMPORT
Click this button to load impulse response files from an external source. The files should have a
Reverb Plug-ins
VST Rack Pro Plug-in Reference | 45