User Manual

RUio16-D Technical Specifications 2
Analog Input Characteristics / Caractéristiques des entrées / 模拟输入特点 /
類比輸入特性 / アナログ入力特性
0 dBu is referenced to 0.775 Vrms. +48 V DC (Phantom power) is supplied to both INPUT 15 and INPUT 16 connectors by
using +48 V switch.
*1 XLR Jack pin assign: 1 = GND, 2 = HOT, 3 = COLD
Analog Output Characteristics / Caractéristiques des sorties analogiques /
模拟输出特点 / 類比輸出特性 / アナログ出力特性
0 dBu is referenced to 0.775 Vrms.
*1 XLR pin assign: 1 = GND, 2 = HOT, 3 = COLD
*2 Stereo Phone Jack pin assign: Tip = LEFT, Ring = RIGHT, Sleeve = GND
Digital I/O Characteristics / Caractéristiques des E/S numériques /
数字 I/O 特点 / 數位輸入/輸出特性 / デジタルI/O特性
*1 CAT5e or higher cable is used for connection.
*2 STP cable is recommended for connection.
Input
Terminals
PAD Gain
Trim
Actual Load
Impedance
For Use with
Nominal
Input level Connector Balanced /
Unbalanced
Nominal Max. before clip
INPUT 15, 16 0 dB +64 dB 3 kΩ 50 – 600 Ω Mics -60 dBu
(0.775 mV)
-40 dBu
(7.75 mV)
XLR-3-31
*1
Balanced
+20 dB -16 dBu
(123 mV)
+4 dBu
(1.23 V)
-26 dB +38 dB 600 Ω Lines -34 dBu
(15.5 mV)
-14 dBu
(155 mV)
-6 dB +10 dBu
(2.45 V)
+30 dBu
(24.5 V)
Output
Terminals
Actual Source
Impedance
For Use with
Nominal
Output level Connector Balanced /
Unbalanced
Nominal Max. before clip
OUTPUT 15, 16 75 Ω 10 kΩ Lines +4 dBu
(1.23 V)
+24 dBu
(12.3 V)
XLR-3-32
*1
Balanced
PHONES 10 Ω 40 Ω Phones 2.5 mW 100 mW Stereo Phone Jack
(TRS)
*2
Unbalanced
Terminal Format Data length Level Audio Connector
Dante Primary/
Secondary
Dante 24 bit / 32 bit 1000 Base-T 16 ch input (From other devices)
16 ch output (To other devices)
etherCON (CAT5e) × 2
*1,2
USB 2.0 (PC) USB 2.0 24 bit 480 Mbps 18 ch input (From PC)
16 ch output (To PC)
USB Type-C