User Manual

③ Sample Rate
Shows the sampling frequency.

VST Rack supports only 44.1 kHz, 48 kHz, 88.2 kHz, and 96 kHz.
④ Monitor Output
Shows the channel that is output when the CUE button in the MAIN window is pressed. Click and then
select a channel from the list that is displayed. When using the RUio16-D, the monitor output is fixed to
Monitor L/R.
⑤ RUio16-D Bypass USB (Only when using Yamaha RUio16-D)
Sets whether to loop back within RUio16-D if VST Rack becomes unresponsive.
⑥ RUio16-D Sensitivity (Only when using Yamaha RUio16-D)
Shows the speed for determining if VST Rack is unresponsive. Click and then select a speed from the
menu that is displayed.
⑦ RUio16-D Dante ID (Only when using Yamaha RUio16-D)
Shows the Dante ID for the RUio16-D. Click and then select an ID from the menu that is displayed.
⑧ RUio16-D Output (Only when using Yamaha RUio16-D)
Shows the signal that is sent to the OUTPUT terminal that is selected by the [MONITOR/DANTE/USB]
switch on the RUio16-D.
⑨ Information (Only when using Yamaha RUio16-D)
Shows the firmware version for the RUio16-D, and the version for Dante.
SETTINGS Window
VST Rack Pro User’s Guide | 29