User Manual

Table Of Contents

Configuration screens

Reference Manual

TF series

B Channel output level meter

Displays the channel's output signal level.

FX1L–FX2R

1 Channel name

Touch to display the CH NAME screen.

Touch to display information for a different channel.

2 Recall Safe button

Turns recall safe on and off for the corresponding channel.

You can display the RECALL SAFE screen (page 38) by touching the jump button in

the right corner of the Recall Safe button.

3 Mute Safe button

Touch to temporarily exclude the selected channel from the effects mute group.

If you mute the effects mute group, any channels in that group that have mute safe

enabled will not be muted.

4 Boxes

Touch to display the configuration screen for the corresponding feature.

You can touch the EQ button displayed here to turn EQ on and off.

FROM box: Displays the SEND FROM screen. (page 88) (V3.0 and later)

FX1 (FX2) box: Displays the FX screen. (page 67)

EQ box: Displays the EQ screen. (page 59)

5 Channel on/off button

Turns the selected channel on and off.

6 BAL (balance) slider

Adjusts the left/right volume balance for the channel.

7 SEND TO AUX box

Touch when selected to display the SEND TO AUX screen.

Displays the amount of signal from the selected channel that is sent to each AUX bus.

Send level, the selected channel's fader level, and the actual send level grouped with the

DCA is displayed in the horizontal bar.

The information displayed here indicates whether the signal sent to the AUX bus is the

pre-fader or post-fader signal. Pre-fader signal is displayed in green; post-fader signal is

displayed in gray.

8 ASSIGN box

Displays the ASSIGN screen. (page 74)

9 Channel output level slider

Adjusts the fader level for the selected channel.

0 Channel output level meter

Displays the channel's output signal level.

DCA 1–DCA 8

ձղ ճյն

չպմ

ղճ