User Manual

Screen areas

User's Guide

TF StageMix

SETUP screen

Allows you to configure the StageMix app.

The SETUP screen is divided into the PREFERENCE, LICENSE, and ABOUT screens. You can switch between screens by tapping

the desired screen name at the bottom of the SETUP screen.

PREFERENCE screen

GENERAL area

1 Fader/Pan Delay

Allows you to adjust the amount of delay between when you adjust a control and when the adjustment is applied.

This setting helps prevent unintended fader or pan movement.

Range: 0.00–0.50sec (0.01sec increments)

2 Cue Mode

Allows you to select the desired cue mode.

Mix Cue: Enables cue for multiple channels.

Last Cue: Enables cue for the last channel selected.

3 [SEND SEL] > [CUE] Link

When ON, the CUE follows the selected destination for the SENDS ON FADER mode.

4 Enable Phantom Power Switching

Allows you to enable and disable the console's +48 phantom power feature.

When phantom power is enabled, this switch is displayed in red. When phantom power is disabled, the +48V buttons on the

INPUT screen are disabled.

5 Fader 0dB Detent

If this feature is turned on when you adjust a fader or pan, this feature stops fader and pan operations at 0 dB or center. You

can then continue to drag it as desired.

6 Display Delay Scale

You can select the desired units (frames, meters, feet, milliseconds) that are displayed as the delay time in the Processing area

(



page 19

)

of the HOME screen.

7 Frame Rate

Selects the frame rate (in numbers of frames) for the delay setting of the OUTPUT DELAY effect type.

CONFIRMATION area

8 Pre Fader

Determines whether a confirmation message is displayed when you tap the PRE button to turn it on (i.e., when you switch

to pre-fader mode) in SENDS ON FADER mode.

9 Recall

Determines whether a confirmation message is displayed in the SCENE screen when you recall a scene.

0 Store

Determines whether a confirmation message is displayed in the SCENE screen when you save a scene.