User Manual

Screen areas
User's Guide
TF StageMix
- 23 -
SENDS ON FADER screen
Allows you to use the faders to adjust the send level for each channel.
In SENDS ON FADER mode, the details area changes to display SENDS ON FADER information.
Note, however, that the display does not change for channels that have no send destination.
1 Send pan slider
Displayed when you have selected a stereo channel as the destination of a send. Allows you to adjust the panning of the send.
Not displayed when the destination of the send is FX, SUB.
2 Send ON button
Turns the send on and off. This button lights when the send is turned on.
3 PRE button
Determines whether the pre-fader or post-fader signal is sent. This button lights when it is turned on.
On: Before the fader
Off: After the fader
Not displayed when the destination of the send is SUB or MATRIX.
4 Fader
Allows you to adjust the level of the send.
5 Send level fader
Allows you to adjust the send level of the corresponding channel. You can tap the value and then increase and decrease it by
tapping the up and down arrows.
6 CH NAME display
Displays the channel's number, name, icon, and color.
ձ
ղ
ճ
մ
յ
ն