User Manual

Screen areas
User's Guide
TF StageMix
- 36 -
DELAY screen
The DELAY screen is displayed by tapping the DELAY button in the TOOLBAR area, with either a MATRIX channel or ST IN channel
selected.
Here you can adjust the delay time applied the signal output from MATRIX channels or ST IN channels, useful for delay
compensation.
1 DELAY button
Turns the DELAY on and off.
2 Display selection button
When a MATRIX channel is set to "Stereo", select the MATRIX channel that will display the parameters.
Two buttons are always displayed on the ST IN channel.
3 LR Link button
If switched ON when Stereo is specified for a MATRIX channel, the DELAY on/off and delay time operations for the left/right
channels will be linked together when this is turned on. When the delay times are set to a different value, the delay times will
operate in linked mode, maintaining the time difference.
The LR Link button is always displayed on the ST IN channel (V4.0 and later).
4 DELAY slider
Allows you to adjust the delay time.
You can specify the delay time in frames, meters, feet, or milliseconds.
5 DELAY setting
Determines the delay time by specifying frames, distance (meters or feet) or time (milliseconds). Tap a text box to display the
keyboard and enter a value.
DELAY screen menu
The following items are available in the DELAY screen's context menu.
Copy: Copies the DELAY parameters of the selected channel to the clipboard.
Paste: Pastes the DELAY parameters in the clipboard to the selected channel.
Default: Resets DELAY settings to their default values.
NOTE
For MATRIX channels, this is displayed only when Stereo is specified for that channel. To switch between "Stereo" and "MONOx2", use the
settings on the BUS SETUP screen, located in the SETUP of TF series console.
մյ
ձղ
ճ