User Manual

Wireless settings
User's Guide
TF StageMix
- 5 -
Wireless settings
Configure your wireless access point, and refer to its operating instructions if necessary. Your wireless access point should not
require any special settings in order to use StageMix, however, we recommend that you configure the access point to require a
password for wireless connections for added security.
The following briefly describes the steps needed to configure your wireless access point.
1. Assign the desired wireless network name (also called an "SSID") to the wireless access point.
2. Select a wireless security protocol (WPA, WPA2, etc.) and assign a password to the wireless access point.
3. Select a wireless mode and band (ex: 802.11n 2.4 GHz).
4. If your wireless access point supports Auto Channel Selection, enable it.
This allows the wireless access point to automatically select the wireless channel with the least amount of interference.
Using external antennas with your wireless access point (if supported) will make wireless connections to the access point more
reliable.