User Manual

Specifications
Owner’s Manual
Tio1608-D2
- 121 -
EnglishDeutschFrançais
EspañolPortuguêsItaliano
Русский
日本語
Specifications
General Specifications
Output impedance of signal generator: 150 ohms
Measured with another Tio1608-D2 through Dante network.
Frequency Response Fs = 20Hz-20kHz, refer to the nominal output level @1kHz
Total Harmonic Distortion Fs = 44.1kHz or 48kHz
Fs = 88.2kHz or 96kHz
* Total Harmonic Distortion is measured with a -18dB/octave filter @80kHz
Hum & Noise Fs = 48kHz, EIN: Equivalent Input Noise
Fs = 96kHz, EIN: Equivalent Input Noise
* Hum & Noise are measured w ith A-weighting filter.
Dynamic Range Fs = 48kHz
Fs = 96kHz
* Dynamic Range are measured with A-weighting filter.
Crosstalk@1kHz
* Crosstalk is measured with a -30dB/octave filter @22kHz
Sampling Frequency
Power Requirements
Input Output RL Conditions Min. Typ. Max. Unit
INPUT1-16 OUTPUT 1-8 600Ω GAIN: +66dB. -1.5 0.0 0.5 dB
Input Output RL Conditions Min. Typ. Max. Unit
INPUT1-16 OUTPUT 1-8 600Ω +4dBu@20Hz-20kHz, GAIN: +66dB. 0.1 %
600Ω +4dBu@20Hz-20kHz, GAIN: -6dB. 0.05 %
Input Output RL Conditions Min. Typ. Max. Unit
INPUT1-16 OUTPUT 1-8 600Ω +4dBu@20Hz-20kHz, GAIN: +66dB. 0.2 %
600Ω +4dBu@20Hz-20kHz, GAIN: -6dB. 0.05 %
Input Output RL Conditions Min. Typ. Max. Unit
INPUT1-16 OUTPUT 1-8 600Ω Rs=150Ω, GAIN: +66dB. -128
EIN
dBu
-62 dBu
600Ω Rs=150Ω, GAIN: -6dB. -84 -80 dBu
all Inputs OUTPUT 1-8 600Ω Rs=150Ω, GAINs: -6dB. -70 dBu
- OUTPUT 1-8 600Ω Residual output noise -88 dBu
Input Output RL Conditions Min. Typ. Max. Unit
INPUT1-16 OUTPUT 1-8 600Ω Rs=150Ω, GAIN: +66dB. -128
EIN
dBu
-62 dBu
600Ω Rs=150Ω, GAIN: -6dB. -84 -80 dBu
all Inputs OUTPUT 1-8 600Ω Rs=150Ω, GAINs: -6dB. -70 dBu
- OUTPUT 1-8 600Ω Residual output noise -86 dBu
Input Output RL Conditions Min. Typ. Max. Unit
INPUT1-16 OUTPUT 1-8 600Ω AD + DA, GAIN: -6dB. 108 dB
- OUTPUT 1-8 600Ω DA Converter 112 dB
Input Output RL Conditions Min. Typ. Max. Unit
INPUT1-16 OUTPUT 1-8 600Ω AD + DA, GAIN: -6dB. 108 dB
- OUTPUT 1-8 600Ω DA Converter 110 dB
from/to to/from Conditions Min. Typ. Max. Unit
INPUT n INPUT (n-1) or (n+1) INPUT1-16
adjacent inputs, GAIN: -6dB.
-100 dB
OUTPUT n OUTPUT (n-1) or (n+1) OUTPUT 1-8, input to output -100 dB
Conditions Min. Typ. Max. Unit
External Clock Frequency Range 44.1kHz / 48kHz / 88.2kHz / 96kHz -200 +200 ppm
+4.1667%/+0.1%/-0.1%/-4.0% to all of the above -200 +200 ppm
Conditions Min. Typ. Max. Unit
Power Requirements 100-240V 50/60Hz 50 W
Heat Dissipation 100-240V 50/60Hz 43.5 kcal/h