User Manual

24
TF series Quick Guide
This section explains how to set up the TF series
console the first time you turn it on.
8-1 Setting the internal clock
Set the console’s internal clock, including the date,
time, and format. The date and time set here is used as
a timestamp when saving Scenes.
1 Touch the SETUP icon .
The SETUP screen is displayed.
Recall Safe Mute Group
2 Touch the TIME button.
The screen for setting the time is displayed.
3 Slide the desired fields up and down to set the
date and time.
4 When finished, touch [OK].
5 Press the Home key ( ).
The OVERVIEW screen is displayed.
NOTE
The following operations are available on the SETUP screen,
including the internal clock settings. For details, refer to the
Reference Manual.
• Saving and loading the console settings to/from a USB
storage device
• PREFERENCE settings
• Settings for [USER DEFINED KEYS], [USER DEFINED
KNOBS] and functions assigned to the foot switch
• Custom fader bank settings
• AUX bus signal type
• OMNI OUT settings
• Settings related to controlling the Tio1608-D that is
connected to the NY64-D
• Recall Safe target channel settings
• Mute group settings
• Display brightness settings
• Network settings
8-2 Initialization (factory reset)
In the event that an internal memory error occurs or
you have forgotten your password and cannot operate
the console, you can use the following procedure to
initialize the console.
NOTE
All information that you have stored in the unit will be erased
when you initialize the unit.
Use caution when performing this procedure.
1 Turn on the console while holding down the
Home key (
).
2 When the maintenance screen appears, press the
Initialize All Memories button.
All settings will be restored to the factory defaults.
8. Setup