User Manual
81
[Security] tab
Here you can make security settings.
• Pass Code [Edit Administrator Code]/[Edit Power User
Code]/[Edit Unlock Code] buttons
Click a button to open the “Edit Pass Code” dialog box.
When entering a pass code for the first time, leave the [Enter
Current Pass Code] field empty when you specify the pass code.
• Auto Screen Lock [Enable] check box
If this is selected, you can make screen lock settings.
• Auto Screen Lock [Timeout] slider
Specifies the time until screen lock occurs.
• Auto Screen Lock [Background Color] button
Click this to open the “Select Color” dialog box. Specify a back-
ground color that is used when the image is not shown in the full
screen.
• Auto Screen Lock [Image] button
Click this to open the “Select Image” dialog box. Select an
image file that is shown when the screen is locked.
• Auto Screen Lock Image trash can button
Cancels the selection of the image specified by the Screen Lock
[Image] button. Even if this selection is canceled, the image
remains embedded into the project file.
• Auto Screen Lock [Expansion Mode] list box
From the list, select how the image will be shown in the display
area. For details on these choices, refer to “About the Expansion
Mode.”
• [OK] button
Updates the settings and closes the dialog box.
• [Cancel] button
Closes the dialog box without updating the settings.