User Manual

27 Other Functions
NetworkAmp Manager—Owner’s Manual
New ACU16-C detected [ACU#xx]
ACU16-C gone offline [ACU#xx]
New NHB32-C detected [NHB#xx]
NHB32-C gone offline [NHB#xx]
Online/Offline Status events appear in blue in the Log window.
3 Power Switch Event
This type of event occurs when an amplifier is set to On or Standby.
Date, Time, LineKind, Device
For example:
01/Aug/2002, 21:30:25, PowerOn, [ACU#00 AMP#00]
In other words, amp #00, connected to ACU #00, was turned on at 21:30:25 on
01/Aug/2002.
The
LineKind variable can be: PowerOn or Standby
Power Switch events appear in blue in the Log window, as shown below.
4 Error Event
This type of event occurs when either a system error or parameter error occurs.
Date, Time, Error, ErrorMessage
For example:
01/Aug/2002, 21:30:25, Error, Duplicate Unit ID (NHB32-C:#00)
In other words, at 21:30:25 on 01/Aug/2002, it was detected that NHB #00 is set to the same
ID as another NHB32-C on the network.
The
ErrorMessage variable can be any of the following:
Duplicate Unit ID [NHB#xx]
Duplicate Unit ID [ACU#xx]
Unit COM/MIDI Mode Conflict!
Too Many COM/MIDI Mode Units!
Unit EEPROM Access Error! [NHB#xx]
Unit EEPROM Access Error! [ACU#xx]
AES/EBU Input Sync Error [NHB#xx AES/EBUx CH1/2]
AES/EBU Input Sync Error [NHB#xx AES/EBUx CH3/4]
AES/EBU Input Sync Error [NHB#xx AES/EBUx CH5/6]