User Manual

33 Other Functions
NetworkAmp Manager—Owner’s Manual
Editing Groups
Up to 16 channels can be added to each Group View page.
1 Choose Group View from the View menu.
The Group View page appears.
2 Right-click on the page and select Edit Group View from the pop-up menu.
The Group View Setup dialog box appears, as shown below.
3 Select a group in the Groups list.
You can sort groups by using the Move up and Move down buttons.
4 Use the Group name field to edit the group’s name.
This is the name that appears on the Group View page tabs.
5 Select the ACU16-C to which the power amplifier is connected in the ACU list.
The power amplifiers connected to the selected ACU16-C are displayed in the AMP list.
6 Select a power amplifier in the AMP list.
The channels of the selected power amplifier are displayed in the CH list.