User Manual

Chapter 4 Basic operations in Amp Editor
Amp Editor Owner’s Manual
32
 Saving a project
Here’s how to save the project containing the various settings you created.
23. In the main panel window, click [File] menu  [Save As...].
A dialog box will appear, allowing you to enter a name for the project name.
When using the project with a different computer, if you select the [Copy library data from the user
library folder] check box, the library file will also be conveniently saved in the project’s save destination
folder.
24. Enter the project name, and click the [OK] button.
A dialog box in which you can specify the project’s save destination will appear.
• Projects are saved in units of folders.
25. When you’ve specified the save destination for the project, click the [OK] button.
The project will be saved.
This completes the introduction of basic operations.
For more details about Amp Editor operations, refer to the appropriate chapter of this document.
If you’ve restarted Amp Editor, choose the main panel window [File] menu and click [Open]; then specify the
saved project and load it to reproduce Amp Editor’s settings.
NOTE