User Manual

Chapter 5 Main panel window
Amp Editor Owner’s Manual
49
Device Information
To access the “Device Information” dialog box, click the [View] menu [Device Information] command, or click
the [Show/Hide Device Information] shortcut button.
Regardless of the online status, this lists the status of the devices that are connected to the network within the
workspace. When a problem occurs or when performing system maintenance, this provides conveniently central-
ized management of the operating state of the devices.
Amplifiers connected to the ACD1 are not shown.
[Reboot] check box
By selecting the desired check boxes and clicking the [Reboot] button, you can reboot multiple amplifiers in a
single operation. When you turn on a check box, the [Device] check box for the corresponding devices in the
“Firmware Update” dialog box (page 86) will also turn on.
[Device]
Indicates the name assigned to the device.
[Model]
Indicates the model name of the device (e.g., TX6n).
[ID]
Indicates the Device ID of the device.
[Serial No.] (TXn/XMV only)
Indicates the serial number of the device.
[Network Status]
Shows an icon to indicate the communication status of the device.
: Online state in which the device can be monitored and controlled
: Offline state, not synchronized with the device
NOTE