User Manual

Chapter 5 Main panel window

Amp Editor Owner’s Manual

 [Paste] button

Pastes the contents of the copied or cut scene to the scene selected in the list. The selected scene will be over-

written. When online, or when scene 00 or the current scene is selected, the button will be gray and cannot be

used.

 [Insert] button

Inserts the contents of the copied or cut scene at the position of the scene selected in the list. When online or

for scene 00, the button will be gray and cannot be used.

Scenes following the selected scene will be moved downward by one. For example if a scene named “Confer-

ence” is stored in scene number “05,” and you select scene number “05” and click the [Insert] button, the

inserted scene will be scene number “05,” and the “Conference” scene will move to scene number “06.”

If a scene is stored in the bottom scene of the list, this button will be gray, and it will not be possible to insert

a scene. Delete the contents of the bottom scene of the list before you insert a scene.

• If the scene number to be recalled when an EMG signal is received is located after the scene num-

ber you inserted, you’ll need to re-specify the EMG Scene No. if necessary (page 79).

 [Clear] button

Erases the contents of the scene selected in the list. When scene 00 or the current scene is selected, the button

will be gray and cannot be used.

 [Recall Safe...] button

Opens the “Recall Safe” dialog box (page 54).

 [Scene Link Manager] button

Opens the “Scene Link Manager” dialog box (page 89).

 [Store] button

Stores the current parameter settings to the scene selected in the list. If an empty scene is selected when you

store, a new scene will be created. If a scene is already stored in the selected scene number, a confirmation

dialog box will appear, and then the existing scene will be overwritten.

• If you store a scene in Amp Editor when online with the device, the scene will also be stored in the

device itself regardless of the settings on the device.

• If the [Confirm Scene Store] check box is cleared in the “Preferences” dialog box (page 39), the

confirmation dialog box will not appear.

 [Recall] button

Recalls the scene selected in the list, making it the current scene.

NOTE