User Manual

Chapter 5 Main panel window

Amp Editor Owner’s Manual

Clock

Click the [Device] menu command [Clock...] to access the “Clock Setup” dialog box.

Here you can set the internal clock of the connected device. You can also enable daylight saving time. Click the

[OK] button to apply the modified settings and close the dialog box. Clicking the [OK] button will send the com-

puter’s date and time to the devices to set them, regardless of the Automatically Adjust Device Clocks setting.

 Automatically Adjust Device Clocks

Here you can synchronize the device’s internal clock to the computer’s clock time. There are two ways to set

this.

 [When Synchronized] check box

The time will be set when synchronizing with the device.

 [Daily (works only while online) at :]

If Amp Editor is always running, the clock will be set each day at the specified time. Use the box at right

to specify the time at which the clock will be set. To change the value, use the upward [s] button and

downward [t] button located at the right side of the box.