User Manual
Table Of Contents
- Cover
- What is Amp Editor?
- Special Notices
- Contents
- Preparing for operation
- An overview of Amp Editor
- Setup
- Basic operations in Amp Editor
- Main panel window
- Objects in the window and their function
- Menus in the main panel window
- Preferences
- Event Log
- Device Information
- Scene Manager
- Alert Setup
- Word Clock (TXn only)
- Speaker Processor Library Manager (TXn only)
- Clock
- Language (TXn only)
- GPI (ACD1 only)
- Utility
- IP Address
- IP Control Port No.
- Firmware Update (Updating the internal firmware)
- Scene Link Manager (for devices other than XMV)
- Network Setup
- Synchronization (Synchronization with devices)
- Custom Control Panel Manager
- System View Creator
- Speaker Processor Library Converter
- Tree View window
- Detail View window
- Device Properties window
- Signal Path View window (TXn only)
- Component editor (TXn only)
- Custom control panels
- Appendix
Chapter 6 Tree View window
Amp Editor Owner’s Manual
107
Copying “Selected parameters”
1. Right-click the icon of the amplifier whose settings you want to copy.
2. In the context menu, choose [Copy] [Selected parameters].
The “Select Copy Item” dialog box will be displayed.
3. Selects the settings you wish to copy.
If you select the [Scene] check box when the unit is offline, you will be able to select a scene as a copy
source.
4. Click the [OK] button.
The selected setting will be copied.
Pasting settings
You can paste the copied amplifier settings to another unit in the same series.
1. Right-click the icon of the amplifier to which you want to paste the amplifier settings.
2. In the context menu, choose [Paste].
3. Click the [OK] button on the confirmation dialog.
The settings will be pasted to the destination amplifier.
• You cannot paste the scene to the destination amplifier while the amplifier is online.
NOTE