User Manual
Table Of Contents
- Cover
- What is Amp Editor?
- Special Notices
- Contents
- Preparing for operation
- An overview of Amp Editor
- Setup
- Basic operations in Amp Editor
- Main panel window
- Objects in the window and their function
- Menus in the main panel window
- Preferences
- Event Log
- Device Information
- Scene Manager
- Alert Setup
- Word Clock (TXn only)
- Speaker Processor Library Manager (TXn only)
- Clock
- Language (TXn only)
- GPI (ACD1 only)
- Utility
- IP Address
- IP Control Port No.
- Firmware Update (Updating the internal firmware)
- Scene Link Manager (for devices other than XMV)
- Network Setup
- Synchronization (Synchronization with devices)
- Custom Control Panel Manager
- System View Creator
- Speaker Processor Library Converter
- Tree View window
- Detail View window
- Device Properties window
- Signal Path View window (TXn only)
- Component editor (TXn only)
- Custom control panels
- Appendix
Chapter 8 Device Properties window
Amp Editor Owner’s Manual
135
[Input Alert] tab (TXn/Tn/PC-N only)
Here you can make settings such as the threshold values for the amplifier’s maximum input. These settings can be
changed when online or offline.
The content of the settings for Analog Input Voltage, Slot Input Voltage (TXn only), and Matrix Mixer Input
Level (TXn only) are identical.
q Channel check box
Specifies whether alert detection will be enabled or disabled. If a point exceeding the specified value (Thresh-
old) is detected for the specified number of times (Count) within the specified duration (Detection Time), it
will be determined that an alert has occurred. Detection is in 2 ms intervals.
w Threshold
Specifies the threshold value for the maximum input level.
e Detection Time (TXn only)
Specifies the time during which points exceeding the threshold value will be counted.
e
r
q
w