User Manual
Table Of Contents
- Cover
- What is Amp Editor?
- Special Notices
- Contents
- Preparing for operation
- An overview of Amp Editor
- Setup
- Basic operations in Amp Editor
- Main panel window
- Objects in the window and their function
- Menus in the main panel window
- Preferences
- Event Log
- Device Information
- Scene Manager
- Alert Setup
- Word Clock (TXn only)
- Speaker Processor Library Manager (TXn only)
- Clock
- Language (TXn only)
- GPI (ACD1 only)
- Utility
- IP Address
- IP Control Port No.
- Firmware Update (Updating the internal firmware)
- Scene Link Manager (for devices other than XMV)
- Network Setup
- Synchronization (Synchronization with devices)
- Custom Control Panel Manager
- System View Creator
- Speaker Processor Library Converter
- Tree View window
- Detail View window
- Device Properties window
- Signal Path View window (TXn only)
- Component editor (TXn only)
- Custom control panels
- Appendix
Chapter 3 Setup
Amp Editor Owner’s Manual
19
Windows XP users
1. Chose [Control Panel] [Network connections], and double-click [Local area connec-
tions].
The “Local area connection status” dialog box will appear.
2. In the [General] tab, click [Properties].
The “Local area connection properties” dialog box will appear.
3. In the [General] tab, double-click [Internet protocol (TCP/IP)].
The “Internet protocol (TCP/IP) properties” dialog box will appear.
4. Select [Use the following IP address], and set the [IP address] and [Subnet mask].
We recommend an [IP address] value of “192.168.0.253” and a [Subnet mask] value of “255.255.255.0”.
5. Click the [OK] button to close the dialog box.