User Manual
Table Of Contents
- Cover
- What is Amp Editor?
- Special Notices
- Contents
- Preparing for operation
- An overview of Amp Editor
- Setup
- Basic operations in Amp Editor
- Main panel window
- Objects in the window and their function
- Menus in the main panel window
- Preferences
- Event Log
- Device Information
- Scene Manager
- Alert Setup
- Word Clock (TXn only)
- Speaker Processor Library Manager (TXn only)
- Clock
- Language (TXn only)
- GPI (ACD1 only)
- Utility
- IP Address
- IP Control Port No.
- Firmware Update (Updating the internal firmware)
- Scene Link Manager (for devices other than XMV)
- Network Setup
- Synchronization (Synchronization with devices)
- Custom Control Panel Manager
- System View Creator
- Speaker Processor Library Converter
- Tree View window
- Detail View window
- Device Properties window
- Signal Path View window (TXn only)
- Component editor (TXn only)
- Custom control panels
- Appendix
Chapter 5 Main panel window
Amp Editor Owner’s Manual
57
Data Transfer
Transmits and receives the alert settings to and from the amplifier selected in the Device list.
[From Device] button
Transmits the amplifier alert setting to Amp Editor.
[To Device] button
Transmits the alert settings enabled in the Alert field to the amplifier.
If a password has been established, a dialog box requiring you to enter the password is displayed.
[Change Alert Setup Password...] button
Enables you to change the password that is required when you click the [To Device] button.
Click this button to display a dialog box requesting the current password. When you enter the correct pass-
word, a dialog box enabling you to enter a new password is displayed.