User Manual
Table Of Contents
- Cover
- What is Amp Editor?
- Special Notices
- Contents
- Preparing for operation
- An overview of Amp Editor
- Setup
- Basic operations in Amp Editor
- Main panel window
- Objects in the window and their function
- Menus in the main panel window
- Preferences
- Event Log
- Device Information
- Scene Manager
- Alert Setup
- Word Clock (TXn only)
- Speaker Processor Library Manager (TXn only)
- Clock
- Language (TXn only)
- GPI (ACD1 only)
- Utility
- IP Address
- IP Control Port No.
- Firmware Update (Updating the internal firmware)
- Scene Link Manager (for devices other than XMV)
- Network Setup
- Synchronization (Synchronization with devices)
- Custom Control Panel Manager
- System View Creator
- Speaker Processor Library Converter
- Tree View window
- Detail View window
- Device Properties window
- Signal Path View window (TXn only)
- Component editor (TXn only)
- Custom control panels
- Appendix
Chapter 5 Main panel window
Amp Editor Owner’s Manual
76
Utility
To access the “Utility” dialog box, click the [Device] menu command [Utility...], or right-click a device icon in
the workspace of the Tree View window and choose [Utility...] from the shortcut menu that appears. Here you
can make various settings for a device. This dialog box is available only when online.
Common to all tabs
Device/ID/Model
From the list, select the device whose settings will be viewed/edited.
[Information] tab
Information
Battery
Indicates the state of the internal backup battery. This is shown as three levels: “OK,” “Low Battery,” or
“No Battery.”
Firmware Version
Indicates the firmware version.
Serial No. (TXn/XMV only)
Indicates the serial number of the device.
Slot (TXn only)
Indicates the card name, if an I/O card is installed in the device’s slot.