User Manual
Table Of Contents
- 0. Revision History
- 1. Setup
- 2. Command List
- 3. Command Specifications
- 4. Command Sequence
- 5. Meter Value
- 6. Parameter Value Details
- 6.1. Fader parameter
- 6.2. Other parameters (MTX3, MTX5-D)
- 6.3. Other parameters (MRX7-D)
- 7. Parameter List
- 8. Meter List
MTX3/MTX5-D/MRX7-D/XMV Series/EXi8/EXo8 Remote Control Protocol Specications V3.3.0 rev12
40
3. Command Specications
3-23) DST start/end days query (day/week)
Command Option 1 Option 2 Description
event MTX:DSTGetDayWeek "" Get DST start/end days by day and week
Response
Response string Description
OK event MTX:DSTGetDayWeek "s_weekindex=xxxx|s_day=yyyy|
s_month=zzzz|e_weekindex=uuuu|e_day=vvvv|e_month=wwww"
DST start/end days by day and week
Details: xxxx = Start week (First, Second, Third, Fourth, Fifth, Last)
yyyy = Start day (Sun, Mon, Tue, Wed, Thu, Fri, Sat)
zzzz = Start month (Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec)
uuuu = End week (First, Second, Third, Fourth, Fifth, Last)
vvvv = End day (Sun, Mon, Tue, Wed, Thu, Fri, Sat)
wwww = End month (Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec)
Example: Command: event MTX:DSTGetDayWeek ""
Notication: OK event MTX:DSTGetDayWeek "s_weekindex=Last|s_day=Sun|s_month=Mar|
e_weekindex=Last|e_day=Sun|e_month=Oct"
Meaning: Get DST start/end days by day and week
DST start/end days is set as from last Sunday in March to last Sunday in October
Note: When DST is set not by "day and week" but by "day", error returns.
3-24) DST start/end days setting (day)
Command Option 1 Option 2 Description
event MTX:DSTSetDay "s_month=xxxx|s_date=yyyy|e_month=zzzz|
e_date=wwww"
Set DST start/end days by day
Details: xxxx = Start month (Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec)
yyyy = Start day (1 ~ 31)
zzzz = End month (Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec)
wwww = End day (1 ~ 31)
Response
Response string Description
OK event MTX:DSTSetDay "s_month=xxxx|s_date=yyyy|
e_month=zzzz|e_date=wwww"
DST start/end days by day was set
Details: xxxx = Start month (Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec)
yyyy = Start day (1 ~ 31)
zzzz = End month (Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec)
wwww = End day (1 ~ 31)
Example: Command: event MTX:DSTSetDay "s_month=Mar|s_date=10|e_month=Nov|e_day=3"
Notication: OK event MTX:DSTSetDay "s_month=Mar|s_date=10|e_month=Nov|e_day=3"
Meaning: Set DST start/end days as from March 10 to November 3
DST start/end days was set as from March 10 to November 3