User Manual

Table Of Contents

MTX3/MTX5-D/XMV Series/EXi8/EXo8 Remote Control Protocol Specications V1.0.3

0. Revision History

Version Date Section Description

V1.0.0 Sep. 1, 2013 - Initial version

V1.0.1 Sep. 25, 2013 7 Added note (*1) to XMV "InputSelect" parameter

7 Added *2 to XMV "ATT" and "DigitalATT"

8 Separated Meter List of EXi8 and EXo8

V1.0.2 Jan.14, 2014 3.1 Added Heart beat command

3.1 Added explanation for escape character

3.2.4 Added note for "1-10) Time synchronization notication <Old format>"

3.2.4, 3.4.3 Added time set and get commands

3.2.4, 3.4.3 Added DST related commands

3.3.1 Added note for "2-1) Device run mode query"

3.3.3 Modied description text and added note for "2-9) Keepalive activation setting"

3.4.3 Added alert event log related commands

4 Fixed text "devstatus devmode" to "devstatus runmode" in communication start process explanation

4 Fixed communication start process ow diagram

6 Added parameter value detail for MY4-AEC (table 12, 13, 14)

7 Added parameter "MYInsert 16 Channel" to Parameter List

7 Added MY4-AEC parameters to Parameter List

7 Amend description for parameter "Power" in XMV Parameter List

8 Added MY4-AEC address to Meter List

V1.0.3 May 23, 2014 3.3.1, 4 Added clarication of [devstatus runmode] command, which is necessary to establish remote control

communication.