User Manual
Table Of Contents
- Cover
- What is Amp Editor?
- Special Notices
- Contents
- Preparing for operation
- An overview of Amp Editor
- Setup
- Basic operations in Amp Editor
- Main panel window
- Objects in the window and their function
- Menus in the main panel window
- Preferences
- Event Log
- Device Information
- Scene Manager
- Alert Setup
- Word Clock (TXn only)
- Speaker Processor Library Manager (TXn only)
- Clock
- Language (TXn only)
- GPI (ACD1 only)
- Utility
- IP Address
- IP Control Port No.
- Firmware Update (Updating the internal firmware)
- Scene Link Manager (for devices other than XMV)
- Network Setup
- Synchronization (Synchronization with devices)
- Custom Control Panel Manager
- System View Creator
- Speaker Processor Library Converter
- Tree View window
- Detail View window
- Device Properties window
- Signal Path View window (TXn only)
- Component editor (TXn only)
- Custom control panels
- Appendix
Chapter 5 Main panel window
Amp Editor Owner’s Manual
50
[IP Address]
Indicates the IP address.
[MAC Address]
Indicates the MAC address.
[Firmware Ver.]
Indicates the firmware version.
[MY Card Type]
If an I/O card is installed in the slot, indicates the card name.
[Message]
Displays messages generated by the amplifier itself. Only the single most recent message is displayed; older
messages are not shown.
[Reboot] button
Reboots all of the amplifiers whose [Reboot] check box is selected in the list.
[Firmware Update...] button
Opens a dialog box allowing you to select the folder containing the update file. When you select a folder, the
“Firmware Update” dialog box will appear (page 86). Here you can update the firmware.
[Utility...] button
Shows the “Utility” dialog box for the device selected in the list (page 76).
[Event Log] button
Shows the “Event Log” dialog box (page 43).
[Save...] button
Saves the displayed information as a CSV file (comma-delimited text file).