User Manual

Sets the parameter channel.
◦ [Input Type]
Specifies how the input voltage to GPI IN will be applied to the parameter.
You can choose [High Active], [Low Active], [Rising Edge], or [Falling Edge].
•
[MTX Send ON]
The input voltage to the [GPI IN] connector will control the send on/off of the channel.
Select one of the following parameter types, and then make the appropriate setting.
◦
Input Ch Send ON
◦
Fx RTN Send ON
•
[MTX Priority Ducker ON]
The input voltage to the [GPI IN] connector will turn the zone’s Ducker on/off.
Select one of the following parameter types, and then make the appropriate setting.
◦
1st Priority
◦
2nd Priority
•
[MTX Dugan Automixer]
The input voltage to the [GPI IN] connector will turn the parameter on/off.
Select one of the following parameter types, and then make the appropriate setting.
◦
Override(main)
◦
Mute(main)
◦
override(Ch)
•
[SD Play]
The input voltage to the [GPI IN] connector will play the specified audio file.
Select one of the following parameter types, and then make the appropriate setting.
◦
SD Song Select & Play
◦
SD Song Pause
◦ [Input Type]
Specifies how the input voltage to GPI IN will be applied to the parameter.
You can choose [Rising Edge] or [Falling Edge].
•
[Preset Recall]
The input voltage to the [GPI INPUT] connector will recall the specified preset.
◦ [Parameter1]
Select the preset number that you want to recall.
◦ [Input Type]
Specifies how the input voltage from GPI IN will be applied to the parameter.
You can choose [Rising Edge] or [Falling Edge].
14. Audio Processors : MTX5-D/MTX3
ProVisionaire Design User Guide | 195