User Manual

MTX3/MTX5-D/MRX7-D/XMV Series/EXi8/EXo8 Remote Control Protocol Specications V2.2.0 rev8
34
3. Command Specications
3-17) DST offset time query
Command Option 1 Option 2 Description
event MTX:DSTGetOffset "" Get DST offset
Response
Response string Description
OK event MTX:DSTGetOffset "offset=hh:mm" DST offset
Details: hh = Hour (0 to 2)
mm = Minute (0 to 59)
Example: Command: event MTX:DSTGetOffset ""
Notication: OK event MTX:DSTGetOffset "offset=01:00"
Meaning: Get DST offset
DST offset was set to 1 hour
3-18) DST start time setting
Command Option 1 Option 2 Description
event MTX:DSTSetStartTime "time=hh:mm" Set DST start time
Response
Response string Description
OK event MTX:DSTSetStartTime "time=hh:mm" DST start time was set
Details: hh = Hour (0 to 23)
mm = Minute (0 to 59)
Example: Command: event MTX:DSTSetStartTime "time=12:00"
Notication: OK event MTX:DSTSetStartTime "time=12:00"
Meaning: Set DST start time to 12:00
DST start time was set to 12:00
3-19) DST start time query
Command Option 1 Option 2 Description
event MTX:DSTGetStartTime "" Get DST start time
Response
Response string Description
OK event MTX:DSTGetStartTime "time=hh:mm" DST start time
Details: hh = Hour (0 to 23)
mm = Minute (0 to 59)
Example: Command: event MTX:DSTGetStartTime ""
Notication: OK event MTX:DSTGetStartTime "time=12:00"
Meaning: Get DST start time
DST start time is 12:00
3-20) DST end time setting
Command Option 1 Option 2 Description
event MTX:DSTSetEndTime "time=hh:mm" Set DST end time
Response
Response string Description
OK event MTX:DSTSetEndTime "time=hh:mm" DST end time was set
Details: hh = Hour (0 to 23)
mm = Minute (0 to 59)
Example: Command: event MTX:DSTSetEndTime "time=12:00"
Notication: OK event MTX:DSTSetEndTime "time=12:00"
Meaning: Set DST end time to 12:00
DST end time was set to 12:00