User Manual

ManualsBrandsYamaha ManualsMixersDIGITAL MIXING CONSOLE

111

112

113

114

115

116

117

118

119

120

Table Of Contents

How to Use This Reference Manual
Table of contents
Function Tree
SELECTED CHANNEL section
- Operations in the SELECTED CHANNEL Section
Centralogic section
- Operations in the Centralogic section
Input and output patching
- CL console internal patching and Dante audio network patching
- Changing the input patching
- Changing the output patching
- Inserting an external device into a channel
- Directly outputting an INPUT channel
Input channels
- Signal flow for input channels
- Specifying the channel name/icon
- HA (head amp) settings
- Sending the signal from an input channel to the STEREO/MONO bus
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Channel name display indication
- Correcting delay between channels (Input Delay)
- Surround output for input channels
- Channel library operations
OUTPUT channels
- Signal flow for output channels
- Specifying the channel name/icon
- Sending signals from MIX channels to the STEREO/ MONO bus
- Sending signals from MIX channels and STEREO/ MONO channels to MATRIX buses
- Correcting delay between channels (Output Delay)
- Channel library operations
EQ and Dynamics
- Using EQ
- Using dynamics
- Using the EQ/Dynamics libraries
Channel Job
- DCA group
- DCA Roll-out function
- Mute group
- Using the Recall Safe function
- Channel Link function
- Copying, moving, or initializing a channel
- About Mix Minus
Scene memory
- Storing and recalling scenes
- Editing scene memories
- Using the Global Paste function
- Using the Focus Recall function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
Monitor and Cue functions
- Using the Monitor function
- Using the Cue function
Talkback and Oscillator
- Using Talkback
- Using the Oscillator function
Meters
- Operations in the METER screen
- Using an MBCL meter bridge (optional) on the CL3 or CL1 console
Graphic EQ, Parametric EQ, Effects, and PREMIUM RACK
- About the virtual rack
- Virtual rack operations
- Graphic EQ operations
- About AUTOMIXER
- Editing the internal effects
- Effects and tempo synchronization
- Using the Premium Rack
- Using the graphic EQ, parametric EQ, effect, and Premium Rack libraries
I/O devices and external head amps
- Using an I/O device
- Remotely controlling an R series unit
- Remotely controlling an amp
- Remotely controlling WIRELESS unit
- Using an external head amp
MIDI
- MIDI functionality on the CL series console
- Basic MIDI settings
- Using program changes to recall scenes and library items
- Using control changes to control parameters
- Using Parameter Changes to control parameters
Recorder
- About the USB memory recorder
- Assigning channels to the input/output of the recorder
- Recording audio to a USB flash drive
- Playing back audio files from a USB flash drive
- Editing the title list
- Recording or playing back using a computer DAW
- Using the CL console with Nuendo Live
Setup
- About the SETUP screen
- User settings
- Preferences
- USER DEFINED keys
- Functions that can be assigned to USER DEFINED keys
- USER DEFINED knobs
- Functions that can be assigned to USER DEFINED knobs
- Assignable encoders
- Functions that can be assigned to the assignable encoders
- GAIN/PAN/ASSIGN knob (assignable encoder) functions
- Custom fader bank
- Master fader
- Custom fader bank functions
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Formatting a USB flash drive
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Dante audio network settings
- Using GPI (General Purpose Interface)
Help function
- Loading a Help/text file from a USB flash drive
- Viewing Help
- Using USER DEFINED keys to recall Help directly
Other functions
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Initializing the console settings and Dante audio network settings
Warning/Error Messages
Index
Data List
- Table of Contents
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Parameters That Can Be Assigned to Control Changes
- NRPN Parameter Assignments
- Mixing Parameter Operation Applicability
- MIDI Data Format
- Input/output characteristics
- Electrical Characteristics
- Mixer Basic Parameters
- Pin Assignment
- MIDI Implementation Chart

Talkback and Oscillator

Reference Manual

117

2 OSCILLATOR LEVEL field

Indicates the frequency and level of the currently-selected oscillator. A meter in this field

indicates the output level of the oscillator. Press the LEVEL knob to adjust the oscillator

level using the multifunction knob.

3 OSCILLATOR MODE field

Indicates the currently-selected oscillator mode. Pressing the MODE button repeatedly

will switch modes.

4 OSCILLATOR ASSIGN field

An indicator lights to indicate the currently-selected oscillator output destination (input

channels or buses). Use the tabs on the left to select channels or buses to display.

NOTE

In the case of the CL3/CL1, channels that do not exist on those models will not be shown.

5 OSCILLATOR OUTPUT button

Turns the oscillator output on or off.

OSCILLATOR window

You can make detailed settings for the oscillator. This window appears when you press the

OSCILLATOR display button in the MONITOR screen.

1 OSCILLATOR MODE buttons

Select one of the following four operating modes when the oscillator is turned on:

2 Parameter field

Enables you to set the oscillator parameters. The controllers and their functions in this

field vary depending on the selected mode.

Mode = SINE WAVE

• LEVEL knob..........Indicates the output level of the sine wave. You can adjust the

value by using the multifunction knob.

• FREQ knob ...........Indicates the frequency of the sine wave. You can adjust the value

by using the multifunction knob.

Mode = SINE WAVE 2CH

• LEVEL knob (ODD/L) ........ Indicates the output level of the sine wave on the ODD/L

side. You can adjust the value by using the multifunction

knob.

• FREQ knob (ODD/L).......... Indicates the frequency of the sine wave on the ODD/L

side. You can adjust the value by using the multifunction

knob.

• LEVEL knob (EVEN/R) ...... Indicates the output level of the sine wave on the EVEN/

R side. You can adjust the value by using the

multifunction knob.

• FREQ knob (EVEN/R)........ Indicates the frequency of the sine wave on the EVEN/R

side. You can adjust the value by using the multifunction

knob.

By default, ODD(L) is set to 1kHz and EVEN(R) is set to 400Hz. At this time, there are

two meters (L and R).

SINE WAVE A sine wave will be output continuously.

SINE WAVE 2CH

Two sine waves of different frequencies will be output

separately.

PINK NOISE Pink noise will be output continuously.

BURST NOISE Pink noise will be output intermittently.