User Manual
Table Of Contents
- How to Use This Reference Manual
- Table of contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name/icon
- HA (head amp) settings
- Sending the signal from an input channel to the STEREO/MONO bus
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Channel name display indication
- Correcting delay between channels (Input Delay)
- Surround output for input channels
- Channel library operations
- OUTPUT channels
- EQ and Dynamics
- Channel Job
- Scene memory
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, Parametric EQ, Effects, and PREMIUM RACK
- I/O devices and external head amps
- MIDI
- Recorder
- Setup
- About the SETUP screen
- User settings
- Preferences
- USER DEFINED keys
- Functions that can be assigned to USER DEFINED keys
- USER DEFINED knobs
- Functions that can be assigned to USER DEFINED knobs
- Assignable encoders
- Functions that can be assigned to the assignable encoders
- GAIN/PAN/ASSIGN knob (assignable encoder) functions
- Custom fader bank
- Master fader
- Custom fader bank functions
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Formatting a USB flash drive
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Help function
- Other functions
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Initializing the console settings and Dante audio network settings
- Warning/Error Messages
- Index
- Data List
- Table of Contents
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Parameters That Can Be Assigned to Control Changes
- NRPN Parameter Assignments
- Mixing Parameter Operation Applicability
- MIDI Data Format
- Input/output characteristics
- Electrical Characteristics
- Mixer Basic Parameters
- Pin Assignment
- MIDI Implementation Chart
Table of contents
Reference Manual
3
Using the Premium Rack...................................................................................... 144
Using the graphic EQ, parametric EQ, effect, and Premium Rack libraries ............ 153
I/O devices and external head amps .................................... 154
Using an I/O device ............................................................................................. 154
Remotely controlling an R series unit ................................................................... 156
Remotely controlling an amp............................................................................... 159
Remotely controlling WIRELESS unit..................................................................... 160
Using an external head amp ................................................................................ 160
MIDI....................................................................................... 165
MIDI functionality on the CL series console.......................................................... 165
Basic MIDI settings .............................................................................................. 165
Using program changes to recall scenes and library items.................................... 168
Using control changes to control parameters....................................................... 170
Using Parameter Changes to control parameters ................................................. 172
Recorder................................................................................ 173
About the USB memory recorder ......................................................................... 173
Assigning channels to the input/output of the recorder ....................................... 173
Recording audio to a USB flash drive.................................................................... 175
Playing back audio files from a USB flash drive ..................................................... 177
Editing the title list............................................................................................... 178
Recording or playing back using a computer DAW .............................................. 179
Using the CL console with Nuendo Live............................................................... 182
Setup ..................................................................................... 186
About the SETUP screen....................................................................................... 186
User settings ........................................................................................................ 188
Preferences .......................................................................................................... 195
USER DEFINED keys ............................................................................................. 197
Functions that can be assigned to USER DEFINED keys ........................................ 199
USER DEFINED knobs........................................................................................... 203
Functions that can be assigned to USER DEFINED knobs ...................................... 204
Assignable encoders ............................................................................................ 206
Functions that can be assigned to the assignable encoders .................................. 207
GAIN/PAN/ASSIGN knob (assignable encoder) functions ..................................... 208
Custom fader bank .............................................................................................. 208
Master fader ........................................................................................................ 209
Custom fader bank functions ............................................................................... 210
Console Lock ....................................................................................................... 210
Saving and loading setup data to and from a USB flash drive............................... 211
Formatting a USB flash drive................................................................................ 217
Word clock and slot settings ................................................................................ 218
Using cascade connections ................................................................................... 220
Basic settings for MIX buses and MATRIX buses.................................................... 223
Switching the entire phantom power supply on/off.............................................. 224
Specifying the brightness of the touch screen, LEDs, channel name displays,
and lamps ................................................................................................. 224
Setting the date and time of the internal clock ..................................................... 225
Setting the network address ................................................................................. 225
Dante audio network settings ............................................................................... 226
Using GPI (General Purpose Interface) .................................................................. 237
Help function......................................................................... 243
Loading a Help/text file from a USB flash drive ..................................................... 243
Viewing Help........................................................................................................ 243
Using USER DEFINED keys to recall Help directly................................................... 244
Other functions ..................................................................... 245
Initializing the unit to factory default settings ....................................................... 245
Adjusting the detection point of the touch screen (Calibration function) .............. 245
Adjusting the faders (Calibration function) ........................................................... 246
Fine-tuning the input and output gain (Calibration function) ............................... 246
Adjusting the channel color (Calibration function)................................................ 248
Adjusting the brightness of the channel name display .......................................... 248
Adjusting the contrast of the channel name display.............................................. 249
Initializing the console settings and Dante audio network settings........................ 249
Warning/Error Messages ...................................................... 250
Index...................................................................................... 253