User Manual
Table Of Contents
- How to Use This Reference Manual
- Table of contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name/icon
- HA (head amp) settings
- Sending the signal from an input channel to the STEREO/MONO bus
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Channel name display indication
- Correcting delay between channels (Input Delay)
- Surround output for input channels
- Channel library operations
- OUTPUT channels
- EQ and Dynamics
- Channel Job
- Scene memory
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, Parametric EQ, Effects, and PREMIUM RACK
- I/O devices and external head amps
- MIDI
- Recorder
- Setup
- About the SETUP screen
- User settings
- Preferences
- USER DEFINED keys
- Functions that can be assigned to USER DEFINED keys
- USER DEFINED knobs
- Functions that can be assigned to USER DEFINED knobs
- Assignable encoders
- Functions that can be assigned to the assignable encoders
- GAIN/PAN/ASSIGN knob (assignable encoder) functions
- Custom fader bank
- Master fader
- Custom fader bank functions
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Formatting a USB flash drive
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Help function
- Other functions
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Initializing the console settings and Dante audio network settings
- Warning/Error Messages
- Index
- Data List
- Table of Contents
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Parameters That Can Be Assigned to Control Changes
- NRPN Parameter Assignments
- Mixing Parameter Operation Applicability
- MIDI Data Format
- Input/output characteristics
- Electrical Characteristics
- Mixer Basic Parameters
- Pin Assignment
- MIDI Implementation Chart
Function Tree
Reference Manual
5
NOTE
• The explanations in this reference manual will use the CL5.
• In the case of the CL3/CL1, some screens will not show
channels and faders that do not exist on those models.
OUTPUT PORT 56
MIDI/GPI 165, 237
MIDI SETUP 166
PROGRAM CHANGE 168
CONTROL CHANGE 171
GPI 238
FADER START 241
BUS SETUP 223
CONSOLE LOCK 210
DATE/TIME 225
NETWORK 226
DANTE SETUP 226
SCENE
SCENE LIST 88
GLOBAL PASTE 93
Fade time 97
SONG SELECT 100
FOCUS RECALL 95
RECORDER
USB 173
NUENDO LIVE 182
CH JOB
CH LINK MODE 77
DCA GROUP ASSIGN 66
MUTE GROUP ASSIGN 66
RECALL SAFE MODE 74
CH COPY MODE 81
CH MOVE MODE 83
CH DEFAULT MODE 84
SETUP PATCH
PORT SELECT
23, 25, 106, 113,
155, 222
CH SELECT 20, 126, 174, 209
Others
CONFIRMATION 196
SOFT KEYBORD (21)
LOGIN 191
Startup Menu
MODE SELECT 245
INITIALIZE ALL MEMORIES 245
INITIALIZE CURRENT MEMORIES 245
TOUCH SCREEN CALIBRATION 245
INPUT PORT TRIM 247
OUTPUT PORT TRIM 247
SLOT OUTPUT TRIM 247
FADER CALIBRATION 246
LED COLOR CALIBRATION 248