User Manual

•
Emergency Recall
You can specify whether a snapshot will be recalled if the DME7 receives an EMG (Emergency) signal
from an external device, or if the input voltage to the [GPI IN] connector (IN 16) (which supports +24V)
falls below 2.5V.
Refer to the “Power on Default” dialog box section for information on how to set or clear the assignment.
【Related Features】
•
Control Panel Recall
Register the snapshot that will be recalled on the device control panel.
Click the button to register it.
Click the button to delete a snapshot from the registration list.
Click the button to delete all snapshots from the registration list.
Use the up and down arrow buttons to change the order of the snapshots displayed on the device panel.
13. Audio Processors : DME7
140 | ProVisionaire Design User Guide