User Manual

If ECHO is [ON], any Program Change messages that are received from an external device will be
output unchanged.
◦ Control Change
Enables you to turn on or off the Control Change TX (transmit channel) and Rx (receive channel).
If OMNI is [ON], all Control Change messages will be received regardless of the receive channel
setting. (This applies only to the receive channels. A single channel will be used for transmission.)
If ECHO is [ON], any Control Change messages that are received from an external device will be
output unchanged.
•
Program Change/Control Change switching tabs
These tabs switch between the Program Change setting screen and the Control Change setting screen.
•
[Clear]button
Clears the settings for the currently-selected row.
•
[Clear All]button
Clears the settings for all rows.
■ [Program Change] Tab
Assigns shapshots to program control change numbers 1 through 128. Switches scenes when program changes
are received. Up to 999 assignments can be made. Snapshots above number 128 are assigned by changing
banks.
•
[Bank Select LSB]button
Banks 0-7 are available. Select from 001 to 128 for each bank.
•
Program Change list
The list in the middle indicates the Program Change numbers and the current setting.
◦ No.
Indicates the Program Change number.
◦ Drag-and-drop Snapshot into this area.
Indicates the name of registered snapshots.
13. Audio Processors : DME7
ProVisionaire Design User Guide | 167