User Manual

•
[Snapshot Recall]
Recalls the snapshot.
Snapshot can be registered in the following ways.
Registration source Registration method
"Snapshot" area Drag and drop the snapshot into the green area of the
"Settings" dialog box.
•
[Parameter]
Operate parameters with switches.
Parameters can be registered in the following ways.
Registration source Registration method
Component editor While pressing and holding down <Ctrl>, drag and drop
a parameter to the green area of the "Settings" dialog
box.
"Parameters" area Drag and drop a parameter to the green area of the
"Settings" dialog box.
Below is an example of assigning a parameter that changes continuously.
•
[Control Type] list box
If Parameter Value Edit is selected
◦ [Inc]
The parameter is added each time the switch is pressed.
You can set the movable range with Minimum/Upper Limit.
Click Minimum/Upper Limit to display controls.
◦ [Dec]
Subtracts the parameter each time the switch is pressed.
You can set the lower limit with Lower Limit.
Click Lower Limit to display the controls.
▪ [Mute Enable] check box
26. DCP
328 | ProVisionaire Design User Guide