User Manual

Owner’s Manual
19
Other functions
Other functions
Remote control
The same operations performed from the RSio64-D’s front
panel, such as turning SRC on/off, can be performed from
a device that supports remote control.
NOTE
For the latest information about remote control compatible
devices, refer to the Yamaha Pro Audio website:
http://www.yamahaproaudio.com/
Remote controllable parameters
* DANTE PATCH: Specifies which channels of the CL/QL series
console are input to which of the RSio64-D’s Dante 1–64 chan-
nels.
IDENTIFY
From a Yamaha CL/QL series console, from R Remote V4,
or from Dante Controller, you can identify a specific
RSio64-D unit from among multiple network-connected
devices. When you specify the IDENTIFY operation, all
front panel indicators on that unit except for the POWER
(INT/EXT) indicator will flash for ten seconds.
Panel lock
You can lock the panel to prevent unintended changes and
operations.
While the lock is engaged, all controllers on the front panel
are inoperable. To engage the lock, press and hold the
SLOT 1 and SLOT 4 [SRC] keys for at least 3 seconds. All
front panel indicators (except the power indicator) flash,
and operation is locked. To disengage the lock, press and
hold the SLOT 1 and SLOT 4 [SRC] keys for at least 3
seconds.
NOTE
• If you turn off the power while panel lock is engaged, panel
lock will still be engaged the next time the power is turned
on.
•Even if the front panel is locked, you can use remote control
to make changes to the settings.
Parameter Description
SRC ON/OFF Turns SRC on or off.
WORD CLOCK
Selects the source used as the mas-
ter clock.
USER PATTERN
Lets you specify the user routing pat-
tern.
DANTE PATCH* Lets you change the Dante patch.
ROUTING PATTERN Displays the pattern number.
SRC SOURCE CLOCK Shows the source used by the SRC.
POWER INT/EXT Shows the power supply status.
SYSTEM/SYNC STATUS Shows the system sync status.
DEVICE LABEL
Shows the UNIT ID/device name
(label).
Press simultaneously for
at least three seconds