User Manual

3
■ Preparing for the update
You will need the following items ready to execute the update procedure.
● A Windows computer equipped with the following conditions:
OS
Windows 8/8.1
/ Pro
Windows 7 Ultimate / Professional / Home Premium
CPU
Intel Pentium 1.2GHz or Intel Celeron 1.7GHz or higher
HDD 250MB or more
Connector
An Ethernet connector that supports a data transfer rate of 100Mbps or
higher
● An Ethernet cable (CAT5e or higher recommended. Straight or cross.)
● The Rio firmware
Download the latest firmware from the following URL.
http://www.yamahaproaudio.com/downloads/
● The Dante firmware update program
Download the latest program from the following URL.
http://www.yamahaproaudio.com/downloads/
■ Update procedure sequence
Update each firmware component in the following sequence.
To update more than one Rio unit, configure “Computer TCP/IP setting (for Rio unit)” and perform
“Rio unit firmware update” one by one. Then, configure “Computer TCP/IP setting (for Dante)” and
perform “Dante firmware update” one by one.
Install the Dante Firmware Update Manager
Computer TCP/IP setting (for Rio unit)
Updating the Rio firmware
Computer TCP/IP setting (for Dante)
Updating the Dante firmware
If there are 2 computers, you may use one for Rio unit firmware update and the other for Dante
firmware update so that you can perform the work without switching the TCP/IP settings. To update
more than one Rio firmware application, it is recommended to use 2 computers for the update.