User Manual

26
- Conversion from CL/QL to LS9:
The parameter settings of the LOW band on
CL/QL are copied to the shared parameter
settings on LS9.
8) Only the GEQs that are mounted to Effect Rack 1-8 are converted. The GEQs mounted to CL/QL
GEQ Rack 1-16 are not converted.
9) Reproducibility of Recall Safe & Focus Recall
Refer to section 3.8 “Recall Filter” Treatment.
10) Pan/Balance parameter is reproduced when LS9’s configuration and CL/QL’s configuration match.
There are a few mismatched parameters due to the different concept of Pan and Balance. For
such cases, the converter will substitute a value which keeps the rule “Odd channel signal goes to
L and even channel signal goes to R”.
Input to Stereo & Input to Mix: Pan/Balance -ST IN/Fx RTN
LS9
Pan mode
Balance mode
Pan for odd Ch
Pan for even Ch
Balance for odd & even Ch
CL/QL
Balance: Center
Balance: Copy
Balance mode (only available mode)
CL/QL
Set Balance mode
Balance: Copy
LS9
Balance for odd & even Ch
Balance mode
LOW
RATIO
MID
RATIO
HI.
RATIO
ATTACK
RELEASE
KNEE
BYPASS
RATIO
ATTACK
RELEASE
KNEE
BYPASS
Copy
LS9
CL/QL