User Manual

ManualsBrandsYamaha ManualsMixersDIGITAL MIXING CONSOLE

181

182

183

184

185

186

187

188

189

190

Table Of Contents

How to Use This Reference Manual
Contents
Function Tree
SELECTED CHANNEL section
- Operations in the SELECTED CHANNEL Section
Centralogic section
- Operations in the Centralogic section
Input and output patching
- CL console internal patching and Dante audio network patching
- Changing the input patching
- Changing the output patching
- Inserting an external device into a channel
- Directly outputting an INPUT channel
Input channels
- Signal flow for input channels
- Specifying the channel name/icon
- HA (head amp) settings
- Sending the signal from an input channel to the STEREO/MONO bus
- Added pan function (Monaural input channels only)
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Channel name display indication
- Correcting delay between channels (Input Delay)
- Surround output for input channels
- Channel library operations
OUTPUT channels
- Signal flow for output channels
- Specifying the channel name/icon
- Sending signals from MIX channels to the STEREO/ MONO bus
- Sending signals from MIX channels and STEREO/ MONO channels to MATRIX buses
- Correcting delay between channels (Output Delay)
- Channel library operations
EQ and Dynamics
- Using EQ
- Using dynamics
- Using the EQ/Dynamics libraries
Channel Job
- DCA group
- DCA Roll-out function
- Mute group
- Using the Recall Safe function
- Channel Link function
- Copying, moving, or initializing a channel
- About Mix Minus
Scene memory
- Storing and recalling scenes
- Editing scene memories
- Using the Global Paste function
- Using the Focus Recall function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
Monitor and Cue functions
- Using the Monitor function
- Using the Cue function
Talkback and Oscillator
- Using Talkback
- Using the Oscillator function
Meters
- Operations in the METER screen
- Using an MBCL meter bridge (optional) on the CL3 or CL1 console
Graphic EQ, Parametric EQ, Effects, and PREMIUM RACK
- About the virtual rack
- Virtual rack operations
- Graphic EQ operations
- About AUTOMIXER
- Editing the internal effects
- Effects and tempo synchronization
- Using the Premium Rack
- Using the graphic EQ, parametric EQ, effect, and Premium Rack libraries
I/O devices and external head amps
- Using an I/O device
- Remotely controlling an R series unit
- Third-party equipment’s HA control function
- Remotely controlling an amp
- Remotely controlling WIRELESS unit
- Using an external head amp
MIDI
- MIDI functionality on the CL series console
- Basic MIDI settings
- Using program changes to recall scenes and library items
- Using control changes to control parameters
- Using parameter changes to control parameters
Recorder
- About the USB memory recorder
- Assigning channels to the input/output of the recorder
- Recording audio to a USB flash drive
- Playing back audio files from a USB flash drive
- Editing the title list
- Recording or playing back using a computer DAW
- Using the CL console with Nuendo Live
Setup
- About the SETUP screen
- User settings
- Preferences
- USER DEFINED keys
- Functions that can be assigned to USER DEFINED keys
- USER DEFINED knobs
- Functions that can be assigned to USER DEFINED knobs
- Assignable encoders
- Functions that can be assigned to the assignable encoders
- GAIN/PAN/ASSIGN knob (assignable encoder) functions
- Custom fader bank
- Master fader
- Custom fader bank functions
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Formatting a USB flash drive
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Dante audio network settings
- Using GPI (General Purpose Interface)
Help function
- Loading a Help/text file from a USB flash drive
- Viewing Help
- Using USER DEFINED keys to recall Help directly
Other functions
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Initializing the console settings and Dante audio network settings
- Update procedure for NAME SUB CPU firmware
- Update function to Dante firmware
Warning/Error Messages
Index
Data List
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Parameters That Can Be Assigned to Control Changes
- NRPN Parameter Assignments
- Mixing Parameter Operation Applicability
- MIDI Data Format
- Input/output characteristics
- Electrical Characteristics
- Mixer Basic Parameters
- Pin Assignment
- MIDI Implementation Chart

MIDI

Reference Manual

184

MIDI/GPI screen (MIDI SETUP page)

You can select the type of MIDI messages that will be transmitted and received, and choose

the port that will be used.

1 PORT/CH field

Enables you to select the port and MIDI channel that will be used to transmit and receive

MIDI messages.

• Tx PORT/Tx CH..................... Press these buttons to open windows in which you can

respectively select a port and MIDI channel to transmit

MIDI messages.

• Rx PORT/Rx CH.................... Press these buttons to open windows in which you can

respectively select a port and MIDI channel to receive

MIDI messages.

NOTE

When transmitting or receiving Parameter Changes, the channel number you specify here is used

as the device number (a number that identifies the transmitting or receiving unit).

2 PROGRAM CHANGE field

Enables you to switch MIDI Program Change message transmission and reception on or

off.

• Tx ........................................... Switches program change transmission on/off.

• Rx........................................... Switches program change reception on/off.

• ECHO..................................... Switches on or off echo output of Program Change

messages. (If this function is on, Program Change

messages received from an external device will be

retransmitted without modification.)

3 PROGRAM CHANGE MODE field

Enables you to select the Program Change transmit/receive mode.

• SINGLE.............. If this button is on, Program Changes will be transmitted and

received on a single MIDI channel (Single mode).

• MULTI ................ If this button is on, program changes will be transmitted/received on

multiple MIDI channels (Multi mode).

• OMNI.................. If this button is on, Program Changes on all MIDI channels will be

received in Single mode. Multi mode transmission/reception and

Single mode transmission are disabled.

• BANK................. If this button is on, Bank Select messages can be transmitted and

received in Single mode. (Bank Select messages switch the group

of Program Change messages to be used.)

4 CONTROL CHANGE field

Enables you to switch MIDI Control Change message transmission and reception on or

off.

• Tx....................... Switches control change transmission on/off.

• Rx ...................... Switches control change reception on/off.

• ECHO................. Switches on or off echo output of Control Change messages. (If this

function is on, Control Change messages received from an external

device will be retransmitted without modification.)

5 CONTROL CHANGE MODE field

This field enables you to select the Control Change transmission/reception mode.

• NRPN button..... If this button is on, the CL mix parameters will be transmitted/

received as NRPN messages on one MIDI channel (NRPN mode).

• TABLE button ... If this button is on, the CL mix parameters will be transmitted/

received as Control Change messages on one MIDI channel

(TABLE mode).

6 PARAMETER CHANGE field

Enables you to turn transmission/reception of SysEx (system exclusive) messages on or

off. (These are special messages used to control the parameter of the CL console.)

• Tx....................... Switches parameter change transmission on/off.

• Rx ...................... Switches parameter change reception on/off.

• ECHO................. Switches on or off echo output of Parameter Change messages. (If

this function is on, Parameter Change messages received from an

external device will be retransmitted without modification.)

7 OTHER COMMAND field

Switches on or off echo output of other MIDI messages. (If this function is on, other

MIDI messages received from an external device will be retransmitted without

modification.)