User Manual

Setup
Reference Manual
217
Functions that can be assigned to USER DEFINED keys
FUNCTION PARAMETER 1 PARAMETER 2 Description
NO ASSIGN - - No assignment.
ALTERNATE
FUNCTION
LATCH -
Toggle ALTERNATE FUNCTION each time it is
pressed.
It goes OFF when the bank is switched.
UNLATCH -
Switch to ALTERNATE FUNCTION only while
pressed.
It goes OFF when the bank is switched.
AUTOMIXER
group a OVERRIDE ON -
Apply a fade-in to the channels in group a
where the override button is on, until the level
drops to 0 dB (the unity gain). Mute all
channels with the button turned off.
group a PRESET ON -
Switch the channels in group a to the mode
indicated by the mode button (man/auto/
mute) next to the lit preset indicator.
group b OVERRIDE ON -
Apply a fade-in to the channels in group b
where the override button is on, until the level
drops to 0 dB (the unity gain). Mute all
channels with the button turned off.
group b PRESET ON -
Switch the channels in group b to the mode
indicated by the mode button (man/auto/
mute) next to the lit preset indicator.
group c OVERRIDE ON -
Apply a fade-in to the channels in group c
where the override button is on, until the level
drops to 0 dB (the unity gain). Mute all
channels with the button turned off.
group c PRESET ON -
Switch the channels in group c to the mode
indicated by the mode button (man/auto/
mute) next to the lit preset indicator.
BRIGHTNESS BANK CHANGE -
Toggle between the brightness settings stored
in A and B.
CH ON SPECIFIC CH *4) Switch the CH ON/OFF.
CH SELECT
INC
-
Increment or decrement the selected channel
number.
DEC
SPECIFIC CH *1) Select a channel from list 1).
CUE
OUTPUT - Switch CUE on/off.
CLEAR CUE
A This clears the CUE for CUE A.
B This clears the CUE for CUE B.
A+B This clears the CUE for CUE A and CUE B.
SPECIFIC CH *2) CUE the channel selected from list 2).
CUE MODE
A
Switches the CUE MODE for CUE A. In Surround
mode, it toggles between MIX, LAST, and 5.1
SOLO with each press. When set to MIX, the
lamp is off. When set to LAST, the lamp is on.
When set to 5.1 SOLO, the lamp flashes.
B Switches the CUE MODE for CUE B.
CUE INTERRUPTION -
Switches the CUE INTERRUPTION function on
or off.
FADER CUE RELEASE -
Switches the FADER CUE RELEASE function on or
off.
CUE
INPUT CUE POINT
A
Selects the cue point for the input channel for
CUE A or CUE B. It toggles between PFL
(immediately before fader), AFL (immediately
after fader), and POST PAN (immediately after
PAN) with each press.
B
DCA CUE POINT
A
Selects the cue point for DCA for CUE A or CUE
B. It toggles between PRE PAN (immediately
before PAN) and POST PAN (immediately after
PAN) with each press.
B
OUTPUT CUE POINT
A
Selects the cue point for the output channel for
CUE A or CUE B. It toggles between PFL (before
fader) and AFL (immediately after fader) with
each press.
B
CUE SETTING
A
For CUE A or CUE B, press the [CUE] key while
holding this key to switch the CUE SETTING for
the selected channel to A or B, and to turn on
the CUE.
B
A+B
Press the [CUE] key while holding this key to
switch the CUE SETTING for the selected
channel to A and B, and to turn on the CUE.
DANTE
INPUT
PATCH LIB
DIRECT RECALL LIBRARY #000-#010
Directly recalls the desired number of the
DANTE INPUT PATCH library. However, it does
not function during a scene recall.
DCA ROLL-
OUT
LAST DCA SEL - This function rolls out or retracts the selected
DCA group.
DCA1 -
:-
DCA16 -
EDITOR
CONTROL
MASTER -
Access the corresponding screen of CL Editor.
SENDS ON FADER -
OVERVIEW
CH 1-16 {CL5/CL3/CL1}
CH17-32 {CL5/CL3/CL1}
CH33-48 {CL5/CL3/CL1}
CH49-64 {CL5/CL3}
CH65-72 {CL5}
ST IN
MIX1-16
MIX17-24
MATRIX
STEREO/MONO
DCA
CUSTOM FADER BANK
A1 {CL5/CL3/CL1}
A2 {CL5/CL3}
A3 {CL3}
B1 {CL5/CL3/CL1}
FUNCTION PARAMETER 1 PARAMETER 2 Description