User Manual

CL/QL External Surround Metering Guide
www.yamahaproaudio.com
5
3.2 CL/QL Monitor Source
To select which sources to monitor in the surround speaker system, open the
MONITOR menu, and select the required SOURCE. During normal surround mix
operation, MIX1-6 will be selected. These MIX buses are used as the Surround Buses.
3.3 CL/QL Output Port Patch
The surround monitor outputs need to be patched to the RTW TM7, so it can
correctly display the audio levels. In the SETUP menu, select OUTPUT PORT.
This will display a new window
that shows 8 output ports at a
time.
Along the bottom of the screen, a
different set of outputs can be
chosen. Select the correct SLOT
that is used to connect to the TM7. Then press the assign button for Slot Port 1.