User Manual

CL/QL External Surround Metering Guide
www.yamahaproaudio.com
8
Also check that no other functions are assigned to the GPI outputs. If they are, they
would be indicated in this screen.
Now the console setup is complete. Next, the RTW TM7 needs to be configured.
4.0 RTW TM7 Setup
The RTW TM7 is a sophisticated metering tool, and is very flexible with the type of
level information to display, and with the screen layout. The GPI inputs can be used
to change the view on the display, or they can be used to start/stop certain
measurement functions. But firstly, a few system settings need to be checked. The
settings mentioned here are appropriate to TM7 firmware version 5.11. They may
vary with different versions.
4.1 Audio Sync Reference
Firstly, open the main MENU at the bottom of the TM7 touch-screen. If it is not
currently visible, touch the lower part of the screen first. Select “Menu”, then select
“System”.
Press “Audio” at the bottom of the screen, and then edit the “Sync Reference”. The
selected setting should be one of the digital audio inputs that is connected, such as
“AES 1a/1b”. Otherwise, the “Auto” setting should work well in most cases.