User Manual

R Remote Version 5.0 User’s Guide 35
Message
Meaning
Waiting
Waiting for start of update
Updating
Update currently in progress
Cancelled
Update was cancelled.
Finished
Update has finished. The device needs to be restarted.
Completed
Update has finished and been confirmed.
Failed
Update has failed.
The “Progress” column of each firmware displays the following information.
Model: Other than RMio64-D: Erasing  Transferring (and writing)
RMio64-D: Writing
Dante:
Transferring  Writing
NOTICE Do not turn off the device or disconnect the cable while the update is in progress. The device may be damaged if you fail
to follow these instructions properly.
① [Select] button
Selects the file including the device firmware and the Dante firmware to be updated. The file
“xxxx_v*_**_rrmt.bin” includes the two types of firmware, the firmware for the device, and the firmware for
Dante.
xxxx represents the product name and *_** represents the firmware version number.
(E.g. rio3224-d_v4_10_rrmt.bin)
The [Select] button is occasionally grayed-out and you cannot select the firmware. This may happen when
a network interface for Dante is not configured correctly. In this case, from Dante Controller, select your
network interface in the Configure Dante Interfaces dialog, and make sure that the devices are shown in
Dante Controller.
② Checkbox
Selects the device firmware (Model) and/or the Dante firmware with each device to be updated.