User Manual
Table Of Contents
- ■ Precautions (Please be sure to read this section first!)
- ■ Update procedure sequence
- ■ Checking the version number
- ■ Preparing for the update
- ■ Updating the RMio64-D firmware
- ■ Installing the Dante Firmware Update Manager
- ■ Computer TCP/IP setting
- ■ Updating the Dante firmware
- ■ About Failsafe Mode
- ■ Error Message List (RMio64-D Update Program)
15
■
Error Message List (RMio64-D Update Program)
Error messages for the RMio64-D Update Program may be displayed on the computer.
This section explains the error messages, and the appropriate action to take.
If the same error message appears each time you try to update, the device may need
repairing, in which case you should contact your Yamaha dealer.
Message
Possible Solution
Invalid file. The update file has broken. Download the file again.
Update failed. Make sure that the computer is connected to the
RMio64-D correctly, then update the firmware again.
Manual Development Department
© 2014-2017
Yamaha Corporation
C0