User Manual
Table Of Contents
- ■ Precautions (Please be sure to read this section first!)
- ■ Update procedure sequence
- ■ Checking the version number
- ■ Preparing for the update
- ■ Updating the RMio64-D firmware
- ■ Installing the Dante Firmware Update Manager
- ■ Computer TCP/IP setting
- ■ Updating the Dante firmware
- ■ About Failsafe Mode
- ■ Error Message List (RMio64-D Update Program)
2
■
Update procedure sequence
Update each firmware component in the following sequence.
■
Preparing for the update
↓
■
Updating the RMio64
-
D firmware
↓
Updating the Dante firmware
■ Installing the Dante Firmware Update Manager
■ Computer TCP/IP setting
■ Updating the Dante firmware
↓
Completion of the update
Refer to the firmware compatibility chart available on the following Yamaha Pro
Audio website as to whether Dante firmware update is required or not.
http://www.yamahaproaudio.com/downloads/
■
Checking the version number
The RMio64-D firmware and the
Dante firmware version number
can be confirmed on the Device
View window in Dante Controller.