User Manual

6
After all the RMio64-D updates are completed, check that the firmware version has
been updated.(→P.2
)
■
Installing the Dante Firmware Update Manager
The Dante Firmware Update Manager is software for updating the Dante firmware.
The Dante Firmware Update Manager installer is stored in the same compressed file
as RMio64-D firmware.
Windows:
DanteFirmwareUpdateManager-x.x.x.exe
Mac:
DanteFirmwareUpdateManager_x-x-x.dmg
The characters “x.x.x” and “x-x-x” represent the Dante Firmware
Update Manager version number.
Double-click the Dante Firmware Update Manager installer, and follow the on-screen
instructions to install the firmware.
• The “Windows Security” dialog box may appear. In such case, follow the on-screen
instruction to continue.
• The Dante firmware does not operate normally if its path contains any multi-byte
character (including Japanese characters). If you use a directory name containing
any multi-byte character in your computer, store the firmware update files in a
directory that consists only of ASCII characters. (e.g. C:\temp).
• When installing the Dante Firmware Update Manager, temporarily disable any
running anti-virus software.
• You may be required to install the Bonjour in the middle of installing the Dante
Firmware Update Manager. If so, download Bonjour from the URL specified by the
Bonjour installer, and install it.
• You may be prompted to restart the computer after the installation is complete.
Before proceeding to update, restart the computer.