User Manual
Table Of Contents
- ■ Precautions (Please be sure to read this section first!)
- ■ Update procedure sequence
- ■ Checking the version number
- ■ Preparing for the update
- ■ Updating the RMio64-D firmware
- ■ Installing the Dante Firmware Update Manager
- ■ Computer TCP/IP setting
- ■ Updating the Dante firmware
- ■ About Failsafe Mode
- ■ Error Message List (RMio64-D Update Program)
9
Mac
1.
Click the “System Preferences” icon on Dock.
The “System Preferences” window appears.
2.
Click the [Network] icon.
The “Network” window appears.
3.
Click [Ethernet].
The Ethernet settings window appears.
If there are multiple Ethernet choices, select the one that is connected to the device.
4.
Confirm that “Using DHCP” is selected in “Configure IPv4” or “Configuration.”
5.
Click “Apply” if you have changed the setting, then close the window.
If you haven’t changed the setting, close the window.