User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
PATCH screen
The PATCH screen is for configuring patch ports to input channels and specifying patch channels to output
ports.
a cb
d
a
INPUT/OUTPUT buttons
Switches the setting between input and output.
b
Patch source button
When on INPUT, these select the source port to patch to the input channel selected with d.
When on OUTPUT, these select the source channel to patch to the output port selected with d.
When None is selected, no patches are available.
c
NONE button
Cancels the patches for source port and source channels.
d
Patch destination buttons
When on INPUT, use to select the input channels to patch to.
When on OUTPUT, use to select the output ports to patch to.
n
PATCH screen menu
Swipe left on the menu swipe indicator on the right of the PATCH screen to open the following menu.
107
Screen functions and names > SETUP screen