User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
DANTE (Setup) screen (DM3 only)
The DANTE (Setup) screen is for configuring the Dante audio network environment.
Press the Setup button under the screen title to open the DANTE (Setup) screen.
cba d
f
ge h
a
Unit ID text box
Use the [TOUCH AND TURN] knob to set the Unit ID. The range is from Y000 to Y01F.
Touch the Apply button to apply the settings.
b
Secondary Port selection button
For selecting the function of the Secondary Port.
Select from Daisy Chain or Redundant.
c
Cancel and Apply buttons
When the settings of Unit ID and Secondary Port are changed, these buttons become active. Use them to cancel or
apply the change to settings.
109
Screen functions and names > SETUP screen